Comment Changer Le Code Digital Door Lock

This blog is the 2d in Signstek'southward serial on How to Change Lawmaking on Keypad Door Lock.

In Signstek's last blog, we take introduced the comprehensive performance of ST668 Plus touchscreen keypad door handle lock and PT-R0S00 electronic keypad door lock, including how to add new user code, how to delete existing user code, and how to change programming code.

In this weblog postal service, we will go on to introduce the comprehensive operation of the remaining two locks of Signstek: PLU331 electronic keypad deadbolt lock and YL-99 digital keyless door knob lock.

Similarly, before browsing this guide, permit'southward review some bones terms virtually Signstek locks:

PC: Programming code, the near of import code in the serial as it is needed to program all user codes and the second PC.

UC: User code, iv or 6 digits that users need to enter when they open the door every 24-hour interval.

PLU331 electronic keypad deadbolt lock

how to change code on keypad door lock

The default PC is 0000, and default UC is 1234.

There is a programming button in the middle of the lock, which is used to fix the function and lock/unlock the door.

Earlier new installation or restoring default setting, you must run the door handing identification first.

1. Door handing identification process

Enter PC→Press programming button→Press 9/0→Press programming button

2. Add new UC

Enter PC→Press programming button→Press i/2→Press programming button→Enter New UC→Printing programming push

Note: up to 6 sets of UC can exist saved. UC could be four-x digits in length.

3. Delete an existing UC

Enter PC→Press programming button→Printing 3/4→Press programming button→Enter New UC→Press programming button

four. Change PC

Enter current PC→Printing programming button→Printing 7/8→Printing programming push button→Enter New PC→Press programming push button

YL-99 digital keyless door knob lock

how to change code on keypad door lock

The YL-99 digital lock is capable of storing to x admission codes:

The UC can exist any number and combination of "i-9" with a maximum of 15 digits.

Only the PC tin have "0" as the first digit and simply the 2d PC can have "9" as the first digit.

One PC: begin with "0"

One second PC: brainstorm with "9"

Viii UC: begin with "1-8"

All codes can be a maximum of fifteen digits including the allocated sequence number.

The default PC is "0123". Enter PC "0123" and printing "#" to unlock. The lock volition sound and the light-green indicator will low-cal up. The lock tin can exist unlocked within 4s after beeping stop.

Note:

If four beeps are heard, the function setup is changed successfully.

Door should always be ajar when creating/changing codes.

1. Change PC

Enter current PC→Press #→Enter new PC started with "0"→Press "*".

2. Add together 2d PC and new UC

Enter PC→Press #→Enter 2nd PC or new UC→Press "*"

Annotation: the second PC and each UC must be entered while the blueish backlight is on. If low-cal goes out, you must re-enter the PC to unlock the door.

three. Delete an individual UC

Enter PC→Press #→Enter "0000"+"i-8"(the sequence number of the code you want to delete)→Press #.