How To Mount Milk Crate On Bike

This post may contain chapter links. If you lot click an affiliate link and make a purchase, I may earn a commission. Also, equally an Amazon Associate, I earn from qualifying purchases.--

In one case you begin riding your bicycle around town you'll quickly acquire that you need to have a method to behave your stuff. In that location's multiple ways (panniers, backpack, straps, racks, etc.) to carry your groceries, work supplies, etc., but 1 of the classic and cheapest methods is to attach a milk crate to your bike.

The traditional milk crate on a wheel method is functional, cheap, and very easy to install.

In this article I will requite step by stride instructions on how to secure a milk crate onto a wheel.

Method 1 – Nada Ties (Recommended)

The simply three supplies you'll need are: basic scissors, iv zip ties, and a milk crate. The zip ties (their technical championship is cable ties) that I purchased were eight inches long.

I was able to notice them at Home Depot (hardware supply store) for effectually $4. I was looking for the cheapest and smallest ties. You lot'll need at least 4 zip ties, perhaps more if y'all want to get above and beyond at locking the crate to your cycle.

The nil ties don't need to exist eight inches. Y'all would exist fine with four inch ties. I constitute these cipher ties on Amazon that would practise the pull a fast one on.

Y'all will also demand to take a rack attached to your bicycle. The crate will attach directly on the rack.

Where to get a milk crate?

You can purchase a milk crate from Amazon for cheap (you can check out a simple crate on Amazon here).

This is my number i recommendation equally it's legal and guaranteed. Search around the internet and you'll have others telling you lot exactly where you can take a milk crate for free, just don't be fooled – if y'all go backside a shop and have a milk crate you are stealing.

The other selection is to enquire effectually. The blue milk crate that I used was given to me for gratis from a friend. You'd be surprised how many people take these plastic crates sitting effectually in their garages. Start asking friends and family. Perhaps someone will have 1 that can yous get for complimentary!

Start by placing the milk crate onto the rack, and making sure it'southward aligned properly.

Information technology should be sitting right in the centre of the rack and so that it'due south evenly distributed.

You lot don't desire one side to be hanging farther off the side of the rack than the other. Depending on how you sit on the saddle you may want to set up the crate a small altitude abroad from the saddle so you won't rub or sit on the edge of the crate.

Next use your zip ties around the plastic crate grid and metal rack. Ensure that each cable tie is tightened as much as possible. Afterward using 4 zip ties I gave the crate a milk shake. It was unmovable and tightly secured to the rack. If y'all're crate is still moving than I would suggest using more zip ties until you are confident that it won't come up off.

For the next step, you'll need your handy keen pair of scissors. Cutting off whatever excess from the nada ties.

The zero ties have been cut downwards so as not to interfere with annihilation that's placed in the crate.

And that's it! You lot have officially attached a milk crate onto your bike! It's really that simple. Requite it a quick spin around the neighborhood to ensure that information technology'southward fastened correctly and not going to wing off. If yous had to purchase the crates and nil ties you're looking at a $20 expense approximately.

Method 2 – Bungee Cords (works, merely not the best)

Another method to put a crate on a bike is with bungee cords. This method will become the job done, simply is non the all-time solution. I used ii bungee cords for the job.

One bungee cord was approximately 16 inches long and the other about xx inches long. I placed the crate on the rack and fed the cords through the crate'southward handles. This kept the crate pressed downward onto the rack and ensured that information technology wouldn't be able to slide off sideways.

There was no rhyme or rhythm to the rest of it other than I pulled the cords equally tight every bit they could go before attaching them to the rack.

The positives of attaching a crate with only bungee cords is that it can exist done very quickly.

Not but can you attach the crate to your bike in a affair of minutes, but yous tin can remove it in a matter of seconds. This is not a permanent fixture on your bicycle. If you only demand the crate for a unmarried quick errand to a store than this could exist the job for you. In one case you're washed with the crate you lot can easily remove it compared to the cypher necktie method.

With this said, there are negatives to using the bungee cord method. The cords going through the pinnacle of the crate can be a nuisance if you lot're trying to fully fill the crate.

Information technology's nice that they tin can be used to assist proceed things in the crate, but they also limit the amount and size of things that you need to transport on the cycle.

Secondly, this method isn't quite every bit secure as the nothing tie method mentioned previously. The crate has a little give in it, and if it was full of heavier items than I could imagine it slightly moving around while pedaling. It wasn't going to fall off the back of the rack, only it definitely wasn't "unmovable" like information technology was with the nix ties.

Lastly, this method visually looks wonky. I understand that yous're already placing a plastic milk crate onto your bike. You probably don't care how your bike looks at this point, but the bungee cords practise give it a more makeshift look.

I hope one of these methods works for you!

These are simply two ways you can attach a milk crate onto a bike. Yous could also utilize twine, rope, or even Velcro straps. The most of import thing is to make sure that the crate isn't going to become anywhere while you are out riding.

However you lot attach your crate yous'll desire to shake it and give information technology a mini-test ride before going for a longer ride. I hope you lot're able to get on the bike and ride today. Happy commuting!

Source: https://bicycle2work.com/milk-crate-to-a-bike/